Tagged: canon 5b00 error
- February 11, 2021 at 2:45 am #105333
To reset Canon G2000 error 5B00 Waste Ink Counter Error – You need to PUT CANON PRINTER IN SERVICE MODE! Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G2000 printer.February 16, 2021 at 4:05 am #105444
If you were looking for “hiring writer for college paper”, but found completely another info, then go to this website and find an answer to your question.February 18, 2021 at 6:03 am #105507
How to put Canon G2000 printer in service mode
Step 1: Turn off Canon G2000 printer
Step 2: Press and hold Canon G2000 printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released Canon G2000 printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2000 printer’s RESET button 5 times
Step 6: Released Canon G2000 printer’s POWER button:
Now, Canon G2000 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When operating system detect FOUND NEW HARDWARE, wait about 20 seconds and press CANCEL
Hope this works.
BruceFebruary 18, 2021 at 10:00 am #105517
The best way for troubleshooting this error is to reset the ink absorber to 0%. You can follow the given steps for resetting the ink absorber:
Download the Canon printer service tool from the internet
Install the setup on your device
Now open the tool and check whether all the buttons and functions are enabled or not
If not, then you should enable all the functions and buttons
If the buttons are greyed out that means your printer has crashed or all the printer is not connected to your PC
Search for the Ink Absorber Counter option
Search for Counter value option
Set the counter value to 0%
Now click on the Set button
You will receive a confirmation message saying A function has been finished on your screen. If you get the error message; your printer is not in service mode. Close the printer and restart your device and then try to resolve the error.
Run your printer on service mode
Running the printer on service mode can also troubleshoot your Canon G2000 5B00 error. You can follow the given steps for running the printer on service mode:
Press the Stop button
Turn off your Canon printer
Hold and press the power button of your Canon printer
Wait for about 4-5 seconds until the blue light glows
Now press the Stop button for 6 times. When you press the button, each time the color of the bulb changes. After pressing the button 6 times, the bulb glows blue.
Release the Power button
The blue light will start flashing. Wait for about 30-40 seconds until the blue light gets stable. Now your printer is running in service mode. Connect the printer to the computer and check whether your error 5B00 Canon G2000 gets fixed or not.
I hope these steps will be useful to resolve Canon printer error G2000 successfully.
Mark WilsonFebruary 25, 2021 at 10:18 am #105715
5B00 error restoring program for Canon Printers
Turn on your Canon printer.
Press and hold the Reset button.
Press and hold the Power On button of Canon printer.
Now hold the power button and release the Reset button.
Press the Reset button twice while holding the power button.